Lexus RZ450E 2023 Owner's Manual page 370

370
6-2. Using the safe driving support functions
 When reversing and a collision with
a stationary object on the outer side
of a turn is likely
Types of sensors
■
P.348
WARNING
To ensure the system can operate
■
properly
P.349
If the system operates unnecessarily,
■
such as at a railroad crossing
P.368
■ Notes when washing the vehicle
P.349
■ Operating conditions of Parking Sup-
port Brake (Static Objects Front and
Rear of the vehicle)
The function will operate when the driving
assist infomation indicator is not illuminated
(P.238, 481) and all of the following con-
ditions are met:
● EV system output restriction control
• PKSB (Parking Support Brake) system is
enabled.
• The vehicle speed is approximately 9
mph (15 km/h) or less.
• There is a static object in the traveling
direction of the vehicle and approxi-
mately 6 to 13 ft. (2 to 4 m) away.
• The PKSB (Parking Support Brake)
determines that a stronger-than-normal
brake operation is necessary to avoid a
collision.
● Brake control
• EV system output restriction control is
operating.
• The PKSB (Parking Support Brake)
determines that an immediate brake
operation is necessary to avoid a colli-
sion.
Operating conditions of Parking Sup-
■
port Brake (Static Objects Around the
vehicle)
This function is operable when any of the
following conditions are met in addition to
the operating conditions of Parking Support
Brake (Static Objects Front and Rear of the
vehicle).
After the EV system has been started, the
●
vehicle has moved approximately 23.0 ft.
(7 m) or less
The R shift position is selected
●
● After the shift position has been changed
from R to D, the vehicle has moved
approximately 23.0 ft. (7 m) or less