Table of Contents
Advertisement
132
1-8. Obtaining the correct driving posture
Washer fluid is sprayed onto the camera
●
lens surface. Therefore, the ice, snow, etc.
adhering around the camera cannot be
removed.
NOTICE
To prevent the camera from malfunc-
■
tioning
●
Observe the following precautions,
otherwise the Digital Rear-view Mirror
may not operate properly.
• Do not strike or hit the camera or sub-
ject it to a strong impact, as the camera
installation position and angle may be
changed.
• Do not remove, disassemble or modify
the camera.
• When washing the camera, rinse it
with a large quantity of water and then
wipe it clean with a soft cloth damp-
ened with water. Do not strongly rub
the camera lens, as it may be
scratched and will not be able to trans-
mit a clear image.
• Do not allow organic solvent, car wax,
window cleaner or glass coat to
adhere to the camera cover. If this hap-
pens, wipe it off as soon as possible.
If you notice any symptoms about the Digital Rear-view Mirror
If you notice any of the following symptoms, refer to the following table for the likely
cause and the solution.
If the symptom is not resolved by the solution, have the vehicle inspected by your
Lexus dealer.
• Do not apply hot water to the camera
in cold weather, as the sudden change
of temperature may cause the camera
to not operate properly.
• When using a high pressure washer to
wash the vehicle, do not directly spray
the camera and its surrounding area,
as doing so may cause the camera to
not operate properly.
Do not subject the camera to a strong
●
impact as this could cause a malfunc-
tion. If this happens, have the vehicle
inspected by your Lexus dealer as
soon as possible.
●
Do not block the vent holes of the mir-
ror. Otherwise, the mirror may be hot,
leading to a malfunction or a fire.
Advertisement
Table of Contents
