Lexus RZ450E 2023 Owner's Manual page 194

194
3-9. Brake hold system
display, read the message and follow the
instructions.
● When do not wish for the parking brake
to operate automatically, press and hold
the brake hold switch until the standby
indicator (green) turns off, and then turn
the power switch off.
When the parking brake is set automati-
■
cally while the system is holding the
brakes
Perform any of the following operations to
release the parking brake.
● Depress the accelerator pedal. (The
parking brake will not be released auto-
matically if the seat belt is not fastened.)
Operate the parking brake switch with
●
the brake pedal depressed.
Make sure that the parking brake indicator
light goes off. (P.154)
When an inspection at your Lexus
■
dealer is necessary
When the brake hold standby indicator
(green) does not illuminate even when the
brake hold switch is pressed with the brake
hold system operating conditions met, the
system may be malfunctioning.
Have the vehicle checked by your Lexus
dealer immediately.
■ If "Brake Hold Malfunction" is displayed
on the multi-information display
The system may be malfunctioning.
Have the vehicle checked by your Lexus
dealer immediately.
■ Warning messages and buzzers
Warning messages and buzzers are used to
indicate a system malfunction or to inform
the driver of the need for caution. If a warn-
ing message is shown on the multi-informa-
tion display, read the message and follow
the instructions.
■ If the brake hold operated indicator
flashes
P.482