Lexus RZ450E 2023 Owner's Manual page 395

NOTICE
When using the memory function,
●
make sure to stop immediately in front
of the stop position. Otherwise the
parking space may not be able to be
detected correctly or assistance may
not be provided to the point that the
vehicle is fully parked.
● Do not use the memory function if a
camera has been subjected to a strong
impact or images of the panoramic
view monitor are misaligned.
● If a camera has been replaced, as the
installation angle of the camera will
have changed, it will be necessary to
reregister parking spaces of the mem-
ory function.
Advanced Park cancelation/sus-
pension
Assistance will be canceled when
■
In situations such as the following,
Advanced Park operation will be can-
celed. Firmly hold the steering wheel
and depress the brake pedal to stop
the vehicle.
As system operation has been canceled,
begin the operation again or continue
parking manually, using the steering wheel.
 The Advanced Park main switch is
pushed
 The shift position has been shifted to
P
 The parking brake is engaged
 A door or the back door is opened
 The driver's seat belt is unfastened
 The outside rear view mirrors are
folded
 The TRAC or VSC is turned off
6-2. Using the safe driving support functions
 The TRAC, VSC or ABS operates
 The power switch is pressed
 The system determines assistance
cannot be continued in the current
parking environment
 The system malfunctions
 While the vehicle was stopped,
"Cancel" was selected on the center
display
Assistance will be suspended when
■
In situations such as the following,
Advanced Park operation will be sus-
pended.
Assistance can be started again by follow-
ing the directions displayed on the center
display.
Also, when assistance is suspended, if the
shift position is shifted twice with the brake
pedal depressed, assistance will be can-
celed in that shift position.
However, if assistance is suspended by
shifting the shift position, assistance will be
canceled if the shift position is shifted once.
 The steering wheel is operated
 The accelerator pedal is depressed
 The shift position has been shifted
 A moving object or stationary
object that may collide with your
vehicle has been detected, resulting
in the operation of the EV system
output control/braking control.
 Camera switch is pressed
Changing the Advanced Park
settings
Select on the center display, and
395
6