My Settings - Lexus RX350 2023 Manual

168
3-6. Favorite settings
1
Check that the shift position is in P.
2
Turn the engine switch to IGNI-
TION ON mode.
3
While pressing the "SET" button,
press and hold the door lock switch
(either lock or unlock) until the
buzzer sounds twice.
If it button could not be canceled, the
buzzer sounds continuously for approxi-
mately 3 seconds.
Recalling the driving position using the
■
memory recall function (vehicles with
the My setting)
Different driving positions can be regis-
tered for each electronic key. Therefore, the
driving position that is recalled may be dif-
ferent depending on the key being carried.
Recalling the driving position using the
■
memory recall function (vehicles with-
out the My setting)
● Different driving positions can be regis-
tered for each electronic key. Therefore,
the driving position that is recalled may
be different depending on the key being
carried.
● If a door other than the driver's door is
unlocked with the smart access system
with push-button start, the driving posi-
tion cannot be recalled. In this case, press
the driving position button which has
been set.
Jam protection function
■
While the driving position is recalled or the
power easy access system is operating, if an
object is stuck behind the front seat, the
front seat will stop and then slightly move
forward. When the jam protection function
operates, the seat stops at a position other
than the set seat position. Check the seat
position.
Customization
■
Some functions can be customized.
(P.543)
*

My Settings

*
: If equipped
By identifying an individual through
a device, such as an electronic key,
the driving position and vehicle set-
tings recorded for that driver can
be recalled when the vehicle is
entered.
By assigning an authentication
device to a driver in advance, the
driver can enter the vehicle with
their preferred settings.
Settings for up to 3 drivers can be
recorded by My Settings.
For details on how to assign/delete
electronic keys, set driver names,
perform initialization, change driv-
ers manually, or delete a driver,
refer to the "MULTIMEDIA
OWNER'S MANUAL".
Types of assigned authentication
devices
An individual can be identified using
the following authentication devices:
 Electronic key/Digital key
An individual is identified when the smart
access system with push-button start
detects their electronic key/digital key.
(P.103, 125)
 Face authentication system
An individual is identified at the open-
ing/closing of the door when face informa-
tion registered using the driver monitor
camera is identified. (P.236)
*
*