Checking The Frame; Checking The Swingarm; Checking Throttle Cable Routing - Husqvarna 125 XC-W 150 2017 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.39

Checking the frame

12.40

Checking the swingarm

12.41

Checking throttle cable routing

Warning
Danger of accidents The throttle cable may slip out of the guide if routed incorrectly.
The throttle slide will then no longer be closed and the speed can no longer be controlled.
–
Make sure that the throttle cable routing and the play in throttle cable complies with the specification.
–
Check the frame for cracks and deformation.
» If the frame exhibits cracks or deformation due to a mechanical impact:
–
Change the frame.
S01316-10
–
Check the swingarm for damage, cracking, and deformation.
» If the swingarm shows signs of damage, cracking, or deformation:
–
Change the swingarm.
S01317-10
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank.
Main work
–
Check throttle cable routing.
The throttle cable must be routed behind the handlebar, on the right of the
frame, and to the carburetor. The throttle cable must be secured behind the fuel
tank contact area rubber band.
» If the throttle cable routing is not as specified:
–
Correct throttle cable routing.
E00336-01
Finishing work
–
Install the fuel tank.
–
Mount the seat. (
Info
Always replace a frame that has been damaged due to a mechanical
impact. Repair of the frame is not authorized by KTM.
Info
Always change a damaged swingarm. Repair of the swingarm is not
authorized by KTM.
p. 61)
( p. 66)
( p. 67)
p. 61)
72