Nortel DMS-100 Series Maintenance Manual page 584

Outside plant access cabinet (opac)

Hide thumbs Also See for DMS-100 Series:

Table of Contents

8-218 Card replacement procedures

At the rear of the MSP

297-8211-550 Standard 05.01 August 1999

Gently pull the circuit card towards you until it clears the shelf.

Ensure the replacement circuit card has the same PEC, including suffix, as the

circuit card just removed.

Align the circuit card with the slots in the shelf and gently slide the circuit

card into the shelf.

Gently but firmly seat the circuit card.

Tighten the captive screw at the top of the circuit card.

Locate the replaced circuit card and reattach the power connectors.

Troubleshooting