Nt6X54 Lcm - Nortel DMS-100 Series Maintenance Manual

Application
Use this procedure to replace the following card in a line concentrating
module (LCM).
PEC
NT6X54
NT6X54
Common procedures
None
Action
The following flowchart is only a summary of the procedure. To replace the
card, use the instructions in the step-action procedure that follows the
flowchart.
8-125
Suffixes Name
AA Bus interface card (BIC)
DA ISDN drawer controller (IDC) card (BIC)
Note: Peripherals with ISDN line drawer for remotes
(ILDR) must use the NT6X54DA card. ILDR is first
available for remote switching center-SONET
(RSC-S) and remote switching center (RSC)
configurations in the NA007/XPM08 timeframe.
ILDR is first available for remote line concentrating
module (RLCM), outside plant module (OPM), and
outside plant access cabinet (OPAC) configurations
in the NA008/XPM81 timeframe.
DMS-100 Family OPAC Maintenance Manual XPM12 and up
Specific card replacement procedures 8-125 8-125
NT6X54
LCM