Nortel DMS-100 Series Maintenance Manual page 16

xii About this document
The following excerpt from a procedure shows the command syntax used in
this document:
1
297-8211-550 Standard 05.01 August 1999
FP 3 Busy CTRL 0: Command request has been submitted.
FP 3 Busy CTRL 0: Command passed.
Manually busy the CTRL on the inactive plane by typing
>BSY CTRL ctrl_no
and pressing the Enter key.
where
ctrl_no is the number of the CTRL (0 or 1)
Example of a MAP response :
FP 3 Busy CTRL 0: Command request has been submitted.
FP 3 Busy CTRL 0: Command passed.