Nortel DMS-100 Series Maintenance Manual page 230

6-10 Recovery Procedures
Recovering an out-of-service OPAC
19
20
21
297-8211-550 Standard 05.01 August 1999
To check the OPAC exit time, type:
>POS RLCM_XPMESAEXIT
and press the Enter key.
Example of a MAP response:
PARMNAME
–––––––––––––––
RLCM_XPMESAEXIT
If PARMVAL is
set to zero
greater than zero
Check if links to the OPAC are stable before you manually restore the OPAC
from ESA. To find the link numbers for this OPAC, type:
>TRNSL C
and press the Enter key.
Example of a MAP response:
Link 0: LTC 1
Link 1: LTC 1
Link 2: LTC 1
Link 3: LTC 1
where
the number that appears next to the word Cap is the host XPM link number.
To access the CARRIER level of the MAP terminal, type:
>TRKS;CARRIER
and press the Enter key.
(continued)
PARMVAL
0
Do
step 20
Allow the system to recover the OPAC. Go to step 29.
0;Cap MS;Status:OK
2;Cap MS;Status:OK
3;Cap S;Status:OK
4;Cap S;Status:OK
;MsgCon:OPN
;MsgCon:OPN