Nortel DMS-100 Series Maintenance Manual page 549

23 Access the disk utility level of the MAP display by typing
>DISKUT
and pressing the Enter key.
24 List all SLM disk volumes into your user directory by typing
>LV CM
and pressing the Enter key.
25 List the SLM file names into your user directory by typing
>LF volume_name
and pressing the Enter key.
where
volume_name is the name of the volume that contains the PM load files,
obtained in step 22
26
Leave the disk utility by typing
>QUIT
and pressing the Enter key.
27 Reload the ESA processor by typing
>LOADPM
and pressing the Enter key.
If loadpm
passes
fails
DMS-100 Family OPAC Maintenance Manual XPM12 and up
Card replacement procedures 8-183
HIE
Do
step 28
step 35
NTMX45
(continued)