Nt2X10 Rmm - Nortel DMS-100 Series Maintenance Manual

Application
Use this procedure to replace an NT2X10 in a remote maintenance module
(RMM).
PEC
NT2X10
NT2X10
Common procedures
The procedure "Replacing a card" is referenced in this procedure.
Action
The following flowchart is a summary of the procedure. To replace the card,
use the instructions in the step-action procedure that follows the flowchart.
Suffix Name
AB Line test unit analog card
BA Multiline test unit analog card
DMS-100 Family OPAC Maintenance Manual XPM12 and up
8-21 Card replacement procedures 8-21 8-21
NT2X10
RMM