Nortel DMS-100 Series Maintenance Manual page 270

7-34 Alarm clearing procedures
OPAC talk battery alarm
Critical
(continued)
28
29
30
At the OPAC cabinet
31
297-8211-550 Standard 05.01 August 1999
To access the CARRIER level of the MAP display, type
>TRKS;CARRIER
and press the Enter key.
To post the host XPM P-side links, type
>POST pm_type pm_no link_no
and press the Enter key.
where
pm_type is the host peripheral (LGC, LTC or RCC2)
pm_no is the peripheral number
link_no is the number of the link associated with the host XPM. Refer
to step 24 display.
When the "MORE ..." prompt appears, use the NEXT command to view
additional links.
Example of a MAP response:
N CLASS SITE LTC CK D ALRM SLIP FRME BER
0 REMOTE HOST 0
To offline the links to prevent alarms and to reset the counters after restoring
the links, type
>OFFL item_no
and press the Enter key.
where
is the item number under the n (0-4) column
item_no
Note: Perform this step for each link made busy in step 27.
Remove the fuses and unseat the repeaters for the LCM unit that the alarm
affects.
If affected LCM unit
is unit 0
is unit 1
0 C 0 0
Host XPM P-side link number
Do
step 32
step 33
ES SES STATE
<–7. 0 0 ManB