Nortel DMS-100 Series Maintenance Manual page 468

8-102 Card replacement procedures
NT6X50 NT6X50
HIE HIE
(end) (continued)
21
22
23
24
25
26
297-8211-550 Standard 05.01 August 1999
Post the LCM by typing
>POST LCM site frame lcm
and pressing the Enter key.
where
site is the site name of the OPAC (alphanumeric)
frame is the frame number of the OPAC (0–99)
lcm is the number of the LCM
Return-to-service the LCM unit busied in step 12 by typing
>RTS UNIT unit_no
and pressing the Enter key.
where
unit_no is the LCM unit to be RTSed (0 or 1).
If RTS
failed
passed
Send any faulty cards for repair according to local procedure.
Record the following items in office records:
date the card was replaced
serial number of the card
symptoms that prompted replacement of the card
Proceed to step 26.
Obtain further assistance in replacing this card by contacting the personnel
responsible for higher level of support.
You have successfully completed this procedure. Return to the maintenance
procedure that directed you to this card replacement procedure and continue as
directed.
Do
step 25
step 23