About This Document; When To Use This Document; How To Check The Version And Issue Of This Document - Nortel DMS-100 Series Maintenance Manual

About this document

When to use this document

This Outside Plant Access Cabinet (OPAC) maintenance reference manual
provides: overview, signaling, and hardware information for understanding
the OPAC product and operation; recovery procedure for returning to service
an OPAC from a completely out-of-service condition; alarm clearing proce-
dures for clearing an OPAC alarm condition at the MAP; card replacement
procedures for removing and replacing hardware modules in the OPAC as
part of maintenance, verification, or acceptance procedures; trouble locating
and clearing information for locating and clearing problems beyond the
scope of other maintenance procedures; and routine maintenance procedures
for performing scheduled routine and preventive maintenance tasks.

How to check the version and issue of this document

The version and issue of the document are indicated by numbers, for
example, 01.01.
The first two digits indicate the version. The version number increases each
time the document is updated to support a new software release. For
example, the first release of a document is 01.01. In the next software
release cycle, the first release of the same document is 02.01.
The second two digits indicate the issue. The issue number increases each
time the document is revised but rereleased in the same software release
cycle. For example, the second release of a document in the same software
release cycle is 01.02.
To determine which version of this document applies to the software in your
office and how documentation for your product is organized, check the
release information in the DMS-10 and DMS-100 Family Product
Documentation Directory, 297-8991-001.
This document is written for all DMS-100 Family offices. More than one
version of this document may exist. To determine whether you have the
latest version of this document and how documentation for your product is
organized, check the release information in the DMS-10 and DMS-100
Family Product Documentation Directory, 297-8991-001.
DMS-100 Family OPAC Maintenance Manual XPM12 and up
ix