Nortel DMS-100 Series Maintenance Manual page 473

At the MAP terminal
8 Load the LCM unit by typing
>LOADPM UNIT lcm_unit CC
and pressing the Enter key.
where
lcm_unit is the LCM unit to be loaded (0 or 1)
If
message loadfile not found in
directory is received
load passed
load failed
9
Determine the type of device on which the PM load files are located.
If load files located on
tape
IOC disk
SLM disk
10 Locate the tape that contains the PM load files.
At the IOE frame
11 Mount the tape on a magnetic tape drive.
At the MAP display
12
Download the tape by typing
>MOUNT tape_no
and pressing the Enter key.
where
tape_no is the number of the tape containing the PM load files
13 List the contents of the tape in your user directory by typing
>LIST T tape_no
and pressing the Enter key.
DMS-100 Family OPAC Maintenance Manual XPM12 and up
Card replacement procedures 8-107
LCM
Do
step 9
step 26
step29
Do
step10
step16
step 21
NT6X51
(continued)