Nortel DMS-100 Series Maintenance Manual page 575

56 Access the disk utility level of the MAP by typing
>DSKUT
and pressing the Enter key.
57 List the IOC file names into your user directory by typing
>LISTVOL volume_name ALL
and pressing the Enter key.
where
volume_name is the name of the volume that contains the PM load files,
obtained in step 55.
58 Leave the disk utility by typing
>QUIT
and pressing the Enter key.
59
Go to step 64.
60 From office records, determine and note the number of the system load module
(SLM) disk and the name of the volume that contains the PM load files.
61 Access the disk utility level of the MAP by typing
>DISKUT
and pressing the Enter key.
62 List the SLM file names into your user directory by typing
>LV CM
and pressing the Enter key.
>LF S00Dload_file_name
and pressing the Enter key.
where
load_file_name is the name of the volume that contains the PM load files,
obtained in step 60.
63 Leave the disk utility by typing
QUIT
and pressing the Enter key.
DMS-100 Family OPAC Maintenance Manual XPM12 and up
Card replacement procedures 8-209
MSP
NTRX42
(continued)