Nortel DMS-100 Series Maintenance Manual page 365

17 The card list identifies the cards that can have defects. Replace the cards one
at a time in the order listed as directed below:
If all cards on the list
are replaced
are not replaced
18 Go to the Card Replacement Procedures for the next card on the card list.
After you finish with the card replacement procedure, go to step 14 of this
procedure.
19 Contact the next level of support to obtain additional help in clearing this alarm.
20 This procedure is complete.
If the system displays additional alarms, proceed to the correct procedure on
how to clear alarms.
DMS-100 Family OPAC Maintenance Manual XPM12 and up
Alarm clearing procedures 7-129
critical, minor critical, minor
Do
step 19
step 18
ESA ESA
(continued) (end)