Executing Trace - Panasonic GM1 User Manual

14.3 Trace Function
Example: Entering variable iVar0 for ST_POU object
7.
Click the [OK] button.
The entered variable will be registered in the trace object.
8.
Repeat steps
The entered variable will be registered in the trace object.
Example: Entering variables iVar1 and iVar2 for ST_POU object
This completes the procedure for registering variables to be traced in the trace object.

14.3.2 Executing Trace

By executing a trace, you can check the variables registered in the trace object.
1.
Connect the PC where GM Programmer is installed and the GM1 controller and log in to the
GM1 controller.
For details, refer to
2.
From the menu bar, select Trace>Download Trace.
A trace will be started. After a cycle task is executed, the values of the variables registered
with the trace object are recorded and displayed in the trace object.
14-14
"Step 5" to "Step 7"
"8.5 Connecting to the GM1
to register other variables to be traced.
Controller".
WUME-GM1RTXOP-01