Panasonic GM1 User Manual page 406
Motion controller controller rtex
Hide thumbs
Also See for GM1:
- Reference manual (166 pages) ,
- User manual (138 pages) ,
- Reference manual (126 pages)
Table of Contents
Advertisement
11.4 Synchronous Operation
● To delete the point, select the point and press the "Del" key.
● You can also check and change a cam table numerically, not in graph format. Select the
"Cam table" tab. Numerical values that are changed will also be reflected in graphs in the
"Cam" tab.
Synchronous cam operation: Cam control (POU programming)
After specifying the master axis and slave axis of the cam table with the "MC_CamTableSelect"
function block, start synchronous cam operation with the "MC_CamIn" function block.
The following is an ST program example that moves the slave axis in conjunction with a cam
table that is created.
For the cam table name, enter the object name of the cam table that has been added.
The following is an ST program example that moves the slave axis in conjunction with a cam
table that is created.
For the cam table name, enter the object name of the cam table that has been added.
11-44
WUME-GM1RTXOP-01
Advertisement
Table of Contents
