Setting Up The Communication Function; Adding A Protocol To Be Used For The Lan Port - Panasonic GM1 User Manual

5.5 Setting up the Communication Function

5.5.1 Adding a Protocol to Be Used for the LAN Port

This section explains how to add an object of the protocol to be used for the LAN port to a
project and set it up.
For example, use the following procedure to add an object of Modbus TCP to LANPort1 and set
it up.
1.
Right-click the [LANPort1] object in the navigator pane and then select "Add Device" from
the context-sensitive menu that is displayed.
The "Add Device" dialog box will be displayed.
2.
Select device "Modbus TCP Master".
WUME-GM1RTXOP-01

5.5 Setting up the Communication Function

5-19