Merging Differences - Panasonic GM1 User Manual

4.14 Comparing Projects

4.14.2 Merging Differences

Differences displayed by comparing projects can be merged into the opened project.
When there are differences in the contents of objects, the differences can be merged by using
the [Accept Block] button or [Accept Single] button.
For example, use the following procedure to merge the differences in the contents of programs.
1.
Perform project comparison.
Project comparison results will be displayed.
For details on how to perform project comparison, refer to
Method".
2.
Move the cursor to the difference location and click the [Accept Block] button or [Accept
Single] button.
The difference will be merged into the opened project. The background of the merged
section will be displayed in yellow. At this stage, the merged content has not been reflected
in the project yet. To reflect the merged content, approval operation is required as below.
[Accept Block] button: Merges the entire block containing the difference at the
cursor position
[Accept Single] button: Merges the difference at the cursor position
3.
From the menu bar, select Project>Commit accepted changes.
The merged content will be approved and reflected in the opened project. Because the
reflected content has not been saved yet, save the project as necessary.
4-34
"4.14.1 Project Comparison
WUME-GM1RTXOP-01