11.5 Multi-axis Operation
Use case
C-point control for
connection between
CNC tables
11.5.13 Interpolation Operation Programming: Settings in CNC Table for C-
point Control
The GM1 controller basically uses C-point control to perform operation and uses P-point control
only when paths are connected linearly.
■
Operation example
[Setting example] C-point control
N000 G91
N010 G01 X20 Y10 F10//Path (1)
N020 G01 X20 Y10//Path (2)
N030 G01 X20 Y0//Path (3)
11-90
Applicable function
block
PMC_NCDecoder
Restriction
Remarks
For details, refer to
"11.5.15 Interpolation Operation
Programming: Joining and
Repeating CNC
Tables".
WUME-GM1RTXOP-01