12.2 IO Parameters for Unit Control
12.2 IO Parameters for Unit Control
The parameter window is used to set up parameters for the controller functions (I/O, PWM, and
counter) and each expansion unit.
This section explains parameter settings, using IO_Configuration as an example.
In the navigator pane, double-click the "IO_Configuration" object. The "IO_Configuration" pane
will be displayed.
In the "IO_Configuration" pane, click the "IO Parameters" tab. The parameter settings sub-pane
will be displayed. Change the settings according to your need.
WUME-GM1RTXOP-01
12-3