Panasonic GM1 User Manual page 571

A new remote adapter device can also be added by selecting an EDS file. Click the
[Install Device] button and select a desired EDS file.
Device tree after devices are added
Setting up an EtherNet/IP scanner device
Set up an EtherNet/IP scanner device as below.
1.
Double-click "EtherNet_IP_Scanner" in the navigator pane.
2.
In the "General" tab, select the "Auto-reestablish connections" check box.
When the check box is not selected: The device is stopped in the event of a
communication error.
When the check box is selected: The device is reconnected automatically in the event of a
communication error.
Setting up a remote adapter device
Set up a remote adapter device, as below.
Setting items for remote adapter devices differ according to the EDS file. The following
procedure is explained, using Panasonic "AFP7CPS31E" as an example.
1.
Double-click "FP7CPU_UNIT_AFP7CPS31E" in the navigator pane.
2.
In the "General" tab, set an IP address and items to be checked at the time of connection.
WUME-GM1RTXOP-01
13.4 EtherNet/IP
13-45