11.5 Multi-axis Operation
The G-code editor and CNC graphic editor are displayed in the right pane of the GM
Programmer screen.
■
G-code editor
Enter an interpolation control pattern using G-code.
For details on the input method, refer to
■
CNC graphic editor
The movements coded in the G-code editor are graphically displayed in real time. You can also
rotate the display and change the scale.
It is possible to change figures in this editor, but this will change codes in the G-code editor,
making settings difficult. For this reason, do not change figures.
The respective properties of the "CNC Setting" and "CNC Program" objects displayed in the
Device tree can be displayed and set by right-clicking each object and then left-clicking
appropriate items.
Each window and setting items are explained below.
■
"CNC settings" - "Properties"
In the Device tree of GM Programmer, right-click Application>CNC settings>Properties in
this order.
11-54
"11.5.6 G-code Editor and Coding
Rules".
WUME-GM1RTXOP-01