Panasonic GM1 User Manual page 170

7.1 Programming in Ladder Diagram (LD)
When you drag the mouse until the position of "Start here" is reached, the display of "Start
here" turns green.
When you stop dragging the mouse at the position of "Start here", a normally open contact
will be placed in the network (circuit).
● You can also insert a normally open contact in the network (circuit) using the following
procedure:
• Right-click in the network (circuit) and select "Insert Contact" from the context-sensitive
menu that is displayed.
• Click the
• From the menu bar, select FBD/LD/IL>Insert Contact.
• Press the <Ctrl> key + <k> key simultaneously.
2.
Select "???" of the normally open contact and enter variable bVar0, and then press the
<Enter> key.
The "Auto Declare" dialog box will be displayed.
3.
Click the [OK] button.
Variable bVar0 will be declared in the declaration section.
7-4
icon on the toolbar.
WUME-GM1RTXOP-01