6 Using the System
6.7.3 Executing test runs
Use this screen to display list of each indoor unit for outdoor unit system addresses.
You can execute test runs , either for each outdoor unit system address or individually.
Procedure
Select 4.Maintenance/Test Run in the main menu and 3.Test run in the sub menu.
1 Select a connection destination link system.
2 Select the outdoor unit to operate.
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
1
3 To operate an individual unit, touch a unit name and operate with the individual control remote
control window.
4 To operate all units in an outdoor unit system, touch the outdoor unit system address column.
A remote control window for operating an outdoor unit system appears. Use this window to
execute a test run. Select Cool, Heat, or Fan as the operating mode.
1.Inspection sign
2.Alarm log
3.Test run
Intelligent Ctrl-1
Intelligent Ctrl-2
Adapter 1-1
Adapter 1-2
:
Adapter 7-2
4
2
52
4
4
Main
Sub
3
3
3