Input Of Title And Comment (Ld) - Panasonic GM1 User Manual

Example: Creating a branch in the following network (circuit) that extends from a
point between contacts bVar1 and bVar2 to a point between contacts bVar3 and
bVar4
1.
In Toolbox, select Ladder elements>Branch Start/End and drag the mouse until
displayed on the right side of contact bVar1 in the main pane is reached.
When you stop dragging the mouse, a red square mark indicating the starting point of a
branch is displayed between contacts bVar1 and bVar2. Blue square marks indicate
candidates for the end point of the branch.
2.
Click the blue square mark between contacts bVar3 and bVar4.
A branch that extends from the point between contacts bVar1 and bVar2 to the point
between contacts bVar3 and bVar4 will be inserted.

7.1.5 Input of Title and Comment (LD)

The Ladder Diagram programming language allows the user to enter the following four types of
titles and comments.
Display examples of titles and comments are shown below.
WUME-GM1RTXOP-01
7.1 Programming in Ladder Diagram (LD)
7-11