14.2 Time Function
14.2 Time Function
14.2.1 Overview of Time Function
This section explains the time function that uses date and time settings in GM Programmer and
function blocks.
14.2.2 Settings Based on GM Programmer
Date and time settings and monitoring for the GM1 controller can be performed using the "Date
and Time Settings" window of GM Programmer. Connect to the GM1 controller and select the
"Date and Time Settings" tab of the "Device" window.
Date and Time Settings pane
The "Device Date and Time" frame on the left side of the pane displays the date / time
information of the GM1 controller. To set date and time, enter date and time in the "Date and
Time" frame on the right side of the pane and click the [Update] button. The entered date and
time will be set in the GM1 controller.
If the "Get date / time from PC" check box is selected, the date/time information of the PC will
be automatically set in the GM1 controller. In this case, the time zone of the PC will be
automatically set in the GM1 controller.
14.2.3 Settings Based on Function Blocks
For details on how to use this function, refer to the GM1 Series Reference Manual (Instruction).
14-10
WUME-GM1RTXOP-01