Checking The System Data History - Panasonic GM1 User Manual

9.6 Checking the Status of GM1 Controller
3.
Click the "Close" button.
The "Status" dialog box will be closed.
Error types
The following table shows the types and recovery methods of errors that are displayed.
Clicking the [Error Clear] button or [RTEX Reset] button deletes the target status item.
Error type
System error (power cycle)
System error (Reinitialize)
System error (Stop operation)
System error (Continue operation)
Incorporation / expansion error
Unit error
RTEX error
Refer to "9.9.2 Checking and Clearing Errors Using GM

9.6.3 Checking the System Data History

You can check histories of errors that have occurred up until now.
1.
Connect the PC where GM Programmer is installed and the GM1 controller.
For details, refer to
2.
From the menu bar, select Online>System Data History.
The "System Data History" dialog box will be displayed. You can check errors that have
occurred up until now.
Clicking the [Update] button collects system data histories again.
9-24
Recovery method
Turn the GM1 controller OFF and then ON.
Reinitialize the system. (Applications will be downloaded without
executing a reset and the mode will be set to RUN.)
Click the [Error Clear] button.
Click the [Error Clear] button.
Reinitialize the system.
Click the [Error Clear] button or reinitialize the system.
Click the [RTEX Reset] button.
"8.5 Connecting to the GM1
Programmer".
Controller".
WUME-GM1RTXOP-01