9.5 Reset
2.
Click the [Yes] button.
Device reset will be executed. When device reset is executed, you are logged out.
● If you right-click the [Application] object in the navigator pane and select "Delete application
from device", the selected application will be removed.
9.5.3 Executing Device Reset from GM1 Controller
Device reset can be executed from the GM1 controller.
1.
Check that the power is OFF, set the mode selector switch to STOP, and set the reset bit of
the DIP switch to ON.
2.
Turn the power ON.
Device reset will be executed.
3.
When the "RUN", "STOP", and "ERROR" LEDs go out, device reset is completed.
9-20
WUME-GM1RTXOP-01