1.
Select the cell in the first row and the first column, and enter instruction "LD".
The LD instruction will be entered.
2.
Press the <Tab> key to move to another cell and enter operand "iVar".
The operand will be entered and the "Auto Declare" dialog box will be displayed.
In the "Auto Declare" dialog box, declare a variable.
3.
Press the <Ctrl> key + <Enter> key simultaneously.
The cursor will move to the next row.
In the second and subsequent rows, enter instructions and operands in the same way as
above.
4.
In Toolbox, select General>Network and drag the mouse until
network (circuit) in the main pane is reached.
A new network (circuit) will be inserted.
5.
From the menu bar, select FBD/LD/IL>Insert label.
"Label" will be inserted.
6.
Enter label name "mark1" and add instructions and operands to the network (circuit) that
has been inserted.
WUME-GM1RTXOP-01
7.5 Programming in Instruction List (IL)
displayed in the
7-35