Panasonic GM1 User Manual page 415

Setting item
Name Settings
Din66025
Imple
mentat
ion
Table
SMC_CNC_REF
Compi
SMC_OUTQUEUE
le
mode
File
"CNC settings" and "CNC Program" will be created in the Device tree. "CNC Program" is
displayed as the name registered earlier ("CNC_Sample").
WUME-GM1RTXOP-01
Description
Specify a name for a CNC table to be created.
[Recommended]
A CNC table is created using G-code.
[Not supported]
A CNC table is created in simple table input format. Because this item is not
supported by the GM1 controller, select "Din66025".
[Recommended]
All interpolation control functions of the GM1 controller can be used.
[Not recommended]
Movement speed is improved, but changing the settings in CNC tables,
joining CNC tables, and other similar operations cannot be performed.
[Not supported]
CNC tables are saved as external reference files. Because this mode is not
supported by the GM1 controller, do not select.
11.5 Multi-axis Operation
11-53