Chapter 8: Troubleshooting SFP
The following sections describe troubleshooting a problem with supported Small Form factor
Pluggable (SFP) and SFP+ devices.
Confirming SFP device support
You must confirm that the SFP or SFP+ device is supported on the switch.
For detailed information about supported SFP and SFP+ devices, see Installing Transceivers and
Optical Components on Avaya Virtual Services Platform 7000 Series, NN47202–302.
Displaying SFP device details
Use this procedure to display SFP device details.
Procedure
1. Log on to ACLI to enter User EXEC mode.
2. Use the show interfaces gbic-info [port <port number>] command to view all
SFP device information or SFP device information for a specific port.
3. Note the SFP or SFP+ device information and identify errors or unsupported devices.
Replacing a SFP device
If you determine a SFP or SFP+ device failure or identify an unsupported device, remove and
replace the failed or unsupported device.
For information about physically installing and removing SFP and SFP+ devices, see Installing
Transceivers and Optical Components on Avaya Virtual Services Platform 7000 Series, NN47202–
302.
July 2015
Comments on this document? infodev@avaya.com
Troubleshooting Avaya VSP 7000 Series
45