Chapter 6 Certify Fiber Cabling; Overview Of Features - Fluke Versiv User Manual

Chapter 6: Certify Fiber Cabling
Before you use the tester, read the safety
information that starts on page 5.

Overview of Features

The Fluke Networks CertiFiber
modules attach to Versiv
rugged, hand-held testers that let you certify, troubleshoot, and
document optical fiber cabling installations. The testers include
these features:
 Measures optical power loss and length on dual-fiber,
multimode cabling at 850 nm and 1300 nm (CFP-MM) or on
dual-fiber singlemode cabling at 1310 nm and 1550 nm
(CFP-SM). The four-wavelength module (CFP-QUAD) measures
at 850 nm, 1300 nm, 1310 nm, and 1550 nm.
Interchangeable connector adapters on input and output

ports let you make reference and test connections that agree
with ISO standards for most SFF (small form factor)
connectors.
 Visual fault locator helps you find breaks, bad splices, and
bends and verify fiber continuity and polarity.
Optional FiberInspector

endfaces and save the images in test reports.
You can save approximately 30,000 fiber test results in the

tester's internal memory. You can save more results on a
removable flash drive.
 
Warning
® Pro Optical Loss Test Set (OLTS)
™
main and remote units to make
™ video probe lets you inspect fiber
93