Toshiba e-STUDIO556 Service Manual page 1324

05/08 Mode Element Sub
element
08 Setting System General Real time log
Mode notification function
08 Setting System General
Mode
08 Setting System Network
Mode
08 Setting System General
Mode
08 Setting System Network InternetFax
mode
08 Setting System Network InternetFax
mode
08 Setting System Network InternetFax
mode
08 Setting System Network MDS
mode
08 Setting System Network MDS
mode
e-STUDIO557/657/757/857
Item Subitem Code Sub-
3626
3629
3631
3635
3637
3638
3639
Authentication 3640
Authentication 3641
Details Default Acceptable
code value value
Department 0
information
transmission setting
of real time log
notification function
Enable/Disable 1
setting of standard
EWB function
Remote Access 1 0~1
(SNMP)
Proof print function 1 0~1
Addition of 0
transmission header
Addition of receiving 0
record
Adding method of 1
transmission header
Authentication of 0
MDS system
Display in TopAccess 0
39
RAM Contents
0-1 SYS Sets whether the department information (number,
name, code) is transmitted or not in the real time log
notification function.
0: Department number, department name, department
code
1: Department number, department name
0-1 SYS 0: Disabled
1: Enabled
* This code is valid for NAD, MJD and AUD only.
SYS 0: Disabled
1: Enabled
SYS 0: Invalid 1: Valid
0-1 SYS 0: Disabled 1: Enabled
0-1 SYS 0: Disabled 1: Enabled
1-2 SYS 1: Overwriting inside the image (5 mm from the top)
2: Adding outside the image (5 mm from the top)
0-1 SYS 0: Disabled (Normal mode)
1: Enabled (MDS authentication mode)
* If the EWB license has not been installed at startup,
this code becomes "0".
0-1 SYS Sets whether the information of MDS Authentication will
be displayed or not in TopAccess and control panel.
0: Non display
1: Display
* When "1" is set in 3640, the setting value of this code
becomes "1" accordingly. The setting value cannot be
changed to "0".
* If the EWB license has not been installed at startup,
this code becomes "0".
Proce Servic
dure e UI
1
1
1
1
1
1
1
1
1