Toshiba e-STUDIO556 Service Manual page 1314

05/08 Mode Element Sub
element
08 Setting Process Fuser Cleaning web feeding
Mode amount control when
printing is finished
08 Setting Process Fuser Cleaning web feeding
Mode amount control when
printing is finished
08 Setting Process Fuser Cleaning web feeding
Mode amount control when
printing is finished
08 Setting Process Developer
Mode
08 Setting Process Process
Mode
e-STUDIO557/657/757/857
Item Subitem Code Sub-
The continuous 2273
printing number is
above the one for the
threshold of pixels [1]
and smaller than the
one for the threshold
of pixels [2]
The continuous 2273
printing number is
above the one for the
threshold of pixels [1]
and smaller than the
one for the threshold
of pixels [2]
The continuous 2273
printing number is
above the one for the
threshold of pixels [1]
and smaller than the
one for the threshold
of pixels [2]
2816
2817
Details Default Acceptable
code value value
12 The number of pixels 20 0~100
is above the one for
the threshold of pixels
[2]:
Thick paper2
13 The number of pixels 20 0~100
is above the one for
the threshold of pixels
[2]:
Thick paper3
14 The number of pixels 20 0~100
is above the one for
the threshold of pixels
[2]:
Transparency
Toner density life 3 0~7
correction switching
Toner supply amount 0 0~8
correction/ New toner
supply motor control
29
RAM Contents
M Feeding amount = setting value * 0.3 (mm)
* The setting value set in this code is applied under the
following conditions.
- Thick paper2
- Continuous printing number: Above the one set in 08-
2270-0 and smaller than the one set in 08-2270-1
- Number of pixels: Above the one set in 08-2271-1
M Feeding amount = setting value * 0.3 (mm)
* The setting value set in this code is applied under the
following conditions.
- Thick paper3
- Continuous printing number: Above the one set in 08-
2270-0 and smaller than the one set in 08-2270-1
- Number of pixels: Above the one set in 08-2271-1
M Feeding amount = setting value * 0.3 (mm)
* The setting value set in this code is applied under the
following conditions.
- Transparency
- Continuous printing number: Above the one set in 08-
2270-0 and smaller than the one set in 08-2270-1
- Number of pixels: Above the one set in 08-2271-1
M 0: Approx. 0.75% lower than current status
1: Approx. 0.50% lower than current status
2: Approx. 0.25% lower than current status
3: Unchanged (Default)
4: Approx. 0.15% higher than current status
5: Approx. 0.25% higher than current status
6: Approx. 0.50% higher than current status
7: Approx. 0.75% higher than current status
M The supply amount of new toner to the developer unit
(the
drive counts of the new toner supply motor) is
corrected.
Smaller<-Toner supply amount->Larger
5->4->3->1->0->2->6->7->8
Proce Servic
dure e UI
4
4
4
1
1