Toshiba e-STUDIO556 Service Manual page 1298

05/08 Mode Element Sub
element
08 Setting Process Fuser Low-temperature
Mode waiting
08 Setting Process Fuser Low-temperature
Mode waiting
08 Setting Process Fuser Low-temperature
Mode waiting
e-STUDIO557/657/757/857
Item Subitem Code Sub-
Temperature addition 2226
Temperature addition 2226
Temperature addition 2226
Details Default Acceptable
code value value
0 Plain paper 0 0~1
(Normal temperature
environment)
1 Plain paper 0 0~1
Low temperature
environment)
2 Thick paper 1 0 0~1
(Normal temperature
environment)
13
RAM Contents
M SSets whether the temperature is raised or not in the
low-temperature warming-up control mode. If "1"
(enable) is set to this code, insufficient fusing due to the
lowered fusing temperature in large volume printing is
suppressed.
0: Disable
1: Enable
* If "1" (enable) is set to this code, "Wait" may appear
frequently.
* Even if "0" (disable) is set to this code, the
temperature is raised for 5 minutes after warming-up.
M SSets whether the temperature is raised or not in the
low-temperature warming-up control mode. If "1"
(enable) is set to this code, insufficient fusing due to the
lowered fusing temperature in large volume printing is
suppressed.
0: Disable
1: Enable
* If "1" (enable) is set to this code, "Wait" may appear
frequently.
* Even if "0" (disable) is set to this code, the
temperature is raised for 5 minutes after warming-up.
M SSets whether the temperature is raised or not in the
low-temperature warming-up control mode. If "1"
(enable) is set to this code, insufficient fusing due to the
lowered fusing temperature in large volume printing is
suppressed.
0: Disable
1: Enable
* If "1" (enable) is set to this code, "Wait" may appear
frequently.
* Even if "0" (disable) is set to this code, the
temperature is raised for 5 minutes after warming-up.
Proce Servic
dure e UI
4
4
4