Toshiba e-STUDIO556 Service Manual page 1359

05/08 Mode Element Sub
element
08 Setting Counter Counter
Mode Settings
08 Setting Counter Custom For dealer
Mode counter
08 Setting Counter Custom For dealer
Mode counter
08 Setting Counter Custom For dealer
Mode counter
e-STUDIO557/657/757/857
Item Subitem Code Sub-
6087
Weighting/Scanning 6088
Weighting/Scanning 6088
Weighting/Print 6089
Details Default Acceptable
code value value
Color/Black quota 0
selection at
twin/mono color count
0 Black/Gray 0 0-9999
1 Full Color 0 0-9999
0 Black/Small 100 0-9999
74
RAM Contents
0-1 SYS When the pages are counted for twin/mono color
counter, this code sets whether the pages are
subtracted from ColorQuota or BlackQuota.
Not all the pages of TwinColor/MonoColor are
subtracted. The pages assigned to twin/mono color
counter are subtracted. The setting of this code is
enabled only in the Color/BlackQuota mode and not
enabled in the JobQuota mode.
If the value of this code is set to "0" (ColorQuota), an
error occurs if a user without color permission performs
twin color printing. Note that the same error occurs in
the JobQuota mode.
0: ColorQuota 1: BlackQuota
Related code:
08-6084, 08-9128, 08-9892
SYS Weights addition of Scan Counter to Custom Counter
(Total Counter). Since the count is calculated based on
the existing Large/Small counter, the count before
changing this setting is also included in the count.
0 (weight: 0.00) – 9999 (weight: 99.99)
SYS Weights addition of Scan Counter to Custom Counter
(Total Counter). Since the count is calculated based on
the existing Large/Small counter, the count before
changing this setting is also included in the count.
0 (weight: 0.00) – 9999 (weight: 99.99)
SYS Weights addition of print to Custom Counter (Total
Counter). Since the count is calculated based on the
existing Large/Small counter, the count before
changing this setting is also included in the count.
0 (weight: 0.00) – 9999 (weight: 99.99)
Proce Servic
dure e UI
1
4 Yes
4 Yes
4 Yes