Toshiba e-STUDIO556 Service Manual page 1438

05/08 Mode Element Sub
element
08 Setting System Image Binarizing level
Mode setting (When judging
as black in the ACS
Mode)
08 Setting System Electronic
Mode Filing
08 Setting System User
Mode interface
e-STUDIO557/657/757/857
Item Subitem Code Sub-
9230
9233
9236
Details Default Acceptable
code value value
4 Step +2 208 0-255
Equipment name 0 0~2
setting to a folder
when saving files
Default setting of print 1 1~4
menu
153
RAM Contents
SYS Sets the binarizing level of each step. When the value
increases, the image becomes darker. When the value
decreases, the image becomes lighter. Refer to 08-
9204.
SYS Sets whether or not adding the equipment name to the
folder when saving files. 0: Not add 1: Add the
equipment name 2: Add the user name
SYS 1: Private print screen (Job list of log-in user is
displayed if user authentication is enabled.)
2: Hold print screen (Job list of log-in user is displayed if
user authentication is enabled.)
3: Private print screen (If the private print screen is
displayed when user authentication is enabled, user list
is displayed if user logs in as GUEST, and job list of
log-in user is displayed if user logs in as general user.)
4: Hold print screen (If the private print screen is
displayed when user authentication is enabled, user list
is displayed if user logs in as GUEST, and job list of
log-in user is displayed if user logs in as general user.)
* If user data department management (08-9264) is
changed from OFF to ON, the value in this code
changes from "1" to "2", and "3" to "4". The value does
not change if it is "2" or"4". Reset this value as
necessary when changing user data department
management (08-9264) from OFF to ON.
Proce Servic
dure e UI
4
1
1