Toshiba e-STUDIO556 Service Manual page 1346

05/08 Mode Element Sub
element
08 Setting Printer Counter Tray-up abnormality
Mode
08 Setting Printer Counter Tray-up abnormality
Mode
08 Setting Printer Counter Tray-up abnormality
Mode
08 Setting Printer General
Mode
08 Setting Printer Counter
Mode
08 Setting Printer General
Mode
08 Setting Printer General
mode
08 Setting Printer Laser Number of beam
mode detection error
08 Setting Printer Laser Number of beam
mode detection error
e-STUDIO557/657/757/857
Item Subitem Code Sub-
4th drawer 4671
4th drawer 4671
4th drawer 4671
4675
4676
4686
4718
4740
4740
Details Default Acceptable
code value value
1 2 times in a row 0 0~255
2 At least 3 times in a 0 0~255
row
3 Total number of 0 0~255
occurrences
Paper ejection setting 2
for wrong bypass
paper size
Ejection counter for 0 0-65535
wrong bypass paper
size
Printer ROM version -
display at printer all
clear
Prior start-up of 1
warming up
0 A beam 0 0-255
1 B beam 0 0-255
61
RAM Contents
M Displays the number of the tray-up abnormality
occurrences which are generated 2 times in a row.
An error is counted when "1" is set for 08-4665, and is
listed in the error history.
M Displays the number of the tray-up abnormality
occurrences which are generated at least 3 times in a
row. The 3 times error is counted as 1, the 4 times one
is 2, the 5 times one is 3 and the later ones are counted
consequently.
An error is counted when "1" is set for 08-4665.
M Displays the total number of tray-up abnormality
occurrences.
An error is counted when "0" is set for 08-4665, and is
listed in the error history.
0-2 M 0: Disabled
1: Changes jammed paper location
2: Ejects paper
M Number of ejection times
- M Displays the low 2 or 3 digits of the printer ROM version
(08-9901) when printer all clear (08-9090) is performed.
The version number is described by alphanumeric
characters.
0-1 M 0: Disabled 1: Enabled
M This code is used to investigate the cause of image
trouble. Only "0" can be input. (Unit: number of times)
M This code is used to investigate the cause of image
trouble. Only "0" can be input. (Unit: number of times)
Proce Servic
dure e UI
4
4
4
1
1
2
1
4
4