Toshiba e-STUDIO556 Service Manual page 1336

05/08 Mode Element Sub
element
08 Setting Printer Laser
Mode
08 Setting Printer Paper Automatic change of
Mode feeding paper source
08 Setting Printer Paper Automatic change of
Mode feeding paper source
08 Setting Printer
Mode
08 Setting Printer Paper Feeding retry number
Mode feeding setting
08 Setting Printer Paper Feeding retry number
Mode feeding setting
08 Setting Printer Paper Feeding retry number
Mode feeding setting
08 Setting Printer Paper Feeding retry number
Mode feeding setting
e-STUDIO557/657/757/857
Item Subitem Code Sub-
4015
When a drawer is 4016
specified
When a drawer is 4016
specified
4017
1st drawer 4020
1st drawer 4020
2nd drawer 4021
2nd drawer 4021
Details Default Acceptable
code value value
Timing of auto- 3 0~6
clearing of polygonal
motor pre-running
rotation
0 PPC 0 0~1
1 Printing/BOX printing 0 0~1
Polygonal motor stop 0 0~1
function when the
[FUNCTION CLEAR]
button is pressed
0 Plain paper 5 0~5
1 Others 5 0~5
0 Plain paper 5 0~5
1 Others 5 0~5
51
RAM Contents
SYS This setting to switch the polygonal motor to the
standby rotation when a certain period of time has
passed from the pre-running. In this code, the period of
time to switch the motor status to the standby rotation
is set.
0: 15 sec. 1: 20 sec. 2: 25 sec. 3: 30 sec. 4: 35 sec. 5:
40 sec. 6: 45 sec.
* This setting is enabled when "0" or "2" is set in 08-
4012 and also "0" is set in 08-4013. The rotational
status in the ready status can be set in 08-4014
SYS Sets whether the automatic change of paper source is
performed or not if the drawer is specified as the paper
source and the paper in the specified drawer runs out
when coping.
0: Does not change the paper source automatically
1: Changes the paper source automatically
SYS Sets whether the automatic change of paper source is
performed or not if the drawer is specified as the paper
source and the paper in the specified drawer runs out
when printing/BOX printing.
0: Does not change the paper source automatically
1: Changes the paper source automatically
SYS 0: Disabled
1: Enabled
M Sets the number of times of the feeding retry from the
1st drawer.
M Sets the number of times of the feeding retry from the
1st drawer.
M Sets the number of times of the feeding retry from the
2nd drawer.
M Sets the number of times of the feeding retry from the
2nd drawer.
Proce Servic
dure e UI
1
4 Yes
4 Yes
1
4 Yes
4 Yes
4 Yes
4 Yes