Toshiba e-STUDIO556 Service Manual page 1417

05/08 Mode Element Sub
element
08 Setting System Option FAX
Mode
08 Setting System Departme
Mode nt
managem
ent
08 Setting System User
Mode interface
08 Setting System User
Mode interface
08 Setting System User
Mode interface
08 Setting System General
Mode
08 Setting System Departme
Mode nt
managem
ent
08 Setting System Departme
Mode nt
managem
ent
08 Setting System Password
Mode
e-STUDIO557/657/757/857
Item Subitem Code Sub-
8920
8921
8922
8923
8924
8925
8926
8927
8929
Details Default Acceptable
code value value
Output tray for 0
FAX/InternetFAX/e-
mail printing
Clearing of the 1
user/department
counter
Email header print 0
setting
Email body print 1
setting
Registration of the 0
received Fax /
Internet Fax / Email
jobs to hold queue
Data tampering 0
checking at startup
Clearing of all -
department counters
Clearing of all user -
counter
Administrator -
password reset
132
RAM Contents
0-2 SYS Selects the bin/tray to which the paper is output.
0: Finisher 1st bin
1: Finisher 1st bin
2: Finisher 2nd bin
0-1 SYS 0: Not allowed
1: Allowed
0-1 SYS Sets whether the header of an Email or an Internet Fax
is printed or not as they are received.
0: Not printed
1: Printed
0-1 SYS Sets whether the body of an Email or an Internet Fax is
printed or not as they are received.
0: Not printed
1: Printed
0-1 SYS Registers the received Fax / Internet Fax / Email jobs to
the hold queue instead of printing immediately. Data in
the hold queue are not printed unless the user allows
printing by means of the control panel.
0: Not registered (normal printing)
1: Register
0-1 SYS Sets whether data tampering is checked or not at
startup.
0: Not checked
1: Checked
- SYS In cases when the administrator has prohibited the
clearing of department counter data using code 08-
8921, a service technician can clear the data using this
code.
- SYS In cases when the administrator has prohibited the
clearing of user counter data using code 08-8921, a
service technician can clear the data using this code.
- SYS The default password is set. When "3: High level" is set
for code 08-8911, the default password is set as a
temporary password.
Proce Servic
dure e UI
1 Yes
1 Yes
1
1
1
1
3
3
3 Yes