To Install A Capillary Column Hanger - Agilent Technologies 8860 Maintaining

4 Maintaining Capillary Columns

To Install a Capillary Column Hanger

To Install a Capillary Column Hanger

Be careful! The oven may be hot enough to cause burns. If the oven is hot, wear
WAR N IN G
heat-resistant gloves to protect your hands.
Wear safety glasses to protect your eyes from flying particles while handling, cutting, or
WAR N IN G
installing glass or fused silica capillary columns. Use care in handling these columns to
prevent puncture wounds.
1 Place GC in maintenance mode: Maintenance > Instrument > Perform Maintenance >
2 Select either the front or back hanger position. (Hanger is shown in back position.)
Front position
Back position
3 Insert the ends of the hanger into the slots in the selected position.
32
Maintenance Mode > Start Maintenance. Wait for the GC to become ready.
Maintaining Your GC