To Install The Optional Fid Ptfe Chimney Insert - Agilent Technologies 8860 Maintaining

9 Maintaining the FID

To Install the Optional FID PTFE Chimney Insert

To Install the Optional FID PTFE Chimney Insert

Be careful! The detector may be hot enough to cause burns. If the detector is hot, wear
WAR N IN G
heat-resistant gloves to protect your hands.
1 Light the FID flame.
2 Insert the PTFE chimney into the FID castle.
When installed, the PTFE chimney insert prevents ignition.
NOTE
160 Maintaining Your GC