To Install An Insulation Cup On The Packed Column Inlet - Agilent Technologies 8860 Maintaining

7 Maintaining the Packed Column Inlet

To Install an Insulation Cup on the Packed Column Inlet

To Install an Insulation Cup on the Packed Column
Inlet
1 Gather the following:
2 Install a plug (for example, a column nut with no-hole ferrule).
3 Push the cup spring to the right. Slide the cup over the inlet fitting so that the insulation at
4 Place the spring into the groove in the inlet liner. Remove the column nut and no-hole
Maintaining Your GC
• No-hole ferrule
• Column nut
the top of the cup is flush against the oven roof.
ferrule.
107