Agilent Technologies 8860 Maintaining page 122

8 Maintaining the COC Inlet
Consumables and Parts for the Cool On-Column Inlet
Table 19 Nuts, ferrules, and hardware for capillary columns
Column id (mm) Description
.530 Ferrule, Vespel/graphite, 0.8-mm id
Ferrule, graphite, 1.0-mm id
Ferrule, graphite, 0.8-mm id
Column nut, finger-tight (for
0.53-mm columns)
.320 Ferrule, Vespel/graphite, 0.5-mm id
Ferrule, graphite, 0.5-mm id
Column nut, finger-tight (for .100- to
.320-mm columns)
.250 Ferrule, Vespel/graphite, 0.4-mm id
Ferrule, graphite, 0.5-mm id
Column nut, finger-tight (for .100- to
.320-mm columns)
.100 and 200 Ferrule, Vespel/graphite, 0.37-mm id
Ferrule, Vespel/graphite, 0.4-mm id
Ferrule, graphite, 0.5-mm id
Ferrule, graphite, 0.4-mm id
Column nut, finger-tight (for .100- to
.320-mm columns)
All Ferrule, no-hole
Capillary column blanking nut
Column nut, universal
Column cutter, ceramic wafer
Pencil, diamond tipped
Ferrule tool kit
122
Typical use
0.45-mm and 0.53-mm capillary columns
0.53-mm capillary columns
0.53-mm capillary columns
Connect column to inlet or detector
0.32-mm capillary columns
0.1-mm, 0.2-mm, 0.25-mm, and 0.32-mm
capillary columns
Connect column to inlet or detector
0.1-mm, 0.2-mm, and 0.25-mm capillary
columns
0.1-mm, 0.2-mm, 0.25-mm, and 0.32-mm
capillary columns
Connect column to inlet or detector
0.1-mm and 0.2-mm capillary columns
0.1-mm, 0.2-mm, and 0.25-mm capillary
columns
0.1-mm, 0.2-mm, 0.25-mm, and 0.32-mm
capillary columns
Connect column to inlet or detector
Testing
Testing–use with any ferrule
Connect column to inlet or detector
Cutting capillary columns
Cutting capillary columns
Ferrule installation
Part number/quantity
5062-3512 (10/pk)
5080-8773 (10/pk)
500-2118 (10/pk)
5020-8293
5062-3514 (10/pk)
5080-8853 (10/pk)
5020-8292
5181-3323 (10/pk)
5080-8853 (10/pk)
5020-8292
5062-3516 (10/pk)
5181-3323 (10/pk)
5080-8853 (10/pk)
500-2114 (10/pk)
5020-8292
5181-3308 (10/pk)
5020-8294
5181-8830 (2/pk)
5181-8836 (4/pk)
420-1000
440-1000
Maintaining Your GC