To Assemble And Install The New Spray Shield And Gas Diverter Assembly - Agilent Technologies G1992A User Manual

To assemble and install the new spray shield and gas diverter
assembly
Before you begin, make sure that you have the parts for the
(p/n G1988-60007)
1 Slide the
2 Insert the
Figure 6
3 Thread the vespel
Nanospray Ion Source User Guide
listed in
Wave washer
• Single bore spray shield
orientation
• Single bore inline spray shield
• Multibore vortex spray shield
Radial gas diverter
align the pin in the Radial gas diverter
Gas diverter pin aligns with the spray shield groove
Radial gas diverter
nut. Make sure to thread the
spray shield nut.
Table 8 on page 62.
over the appropriate spray shield:
for single bore capillary in orthogonal
for inline needle orientation
for multibore capillary
insert into the spray shield. Make sure to
with the notch on the End Cap.
vespel into the
Radial gas diverter
Installation
Spray Shield Kit
Winged spray shield
completely into the Winged
1
13