Replacing The Alarm Speaker - Nellcor OxiMax N-600x Service Manual

Replacing the Alarm Speaker

O M N-600x Service Manual
XI AX
To replace the alarm speaker:
Caution: Handle the speaker ONLY by the edges of the metal ring to avoid
damage.
WARNING: Do not allow other metal objects to come into contact with the
speaker; permanent damage may occur.
1. Pull the holding clip back, and insert the speaker into the top case.
2. Connect the speaker wire harness to J9 on the Main Board PCB.
3. Follow the steps outlined in Assembling the Monitor on page 88.
Disassembling the Monitor
101